<kbd id="80as6"></kbd>
  • <bdo id="80as6"></bdo>
  • <blockquote id="80as6"></blockquote>
  • <code id="80as6"><s id="80as6"></s></code>
    產品資料
      首頁 >>> 產品目錄 >>> 測量儀表

    韓國DacelI儀表|放大器DN-AM1000

    如果您對該產品感興趣的話,可以
    產品名稱: 韓國DacelI儀表|放大器DN-AM1000
    產品型號: 放大器DN-AM1000
    產品展商: 韓國dacell
    產品文檔: 無相關文檔

    簡單介紹

    韓國DacelI儀表|放大器DN-AM1000.深圳市世泰瑞爾工業儀器儀表有限公司代理銷售,韓國DacelI儀表|放大器DN-AM1000


    韓國DacelI儀表|放大器DN-AM1000  的詳細介紹
    韓國DacelI儀表|放大器DN-AM1000

    • SPECIFICATIONS
    Specifications Accuracy
    EXCITATION 5 steps : 1V, 2V, 5V, 7.5V, 10V
    Current : 170mA, max.
    Remote sence error : 0.0005%/Ω at lead resistance (350Ω load)
    Noise and ripple : 0.05% p-p, max (dc 10kHz)
    Stability : ± 0.02%/℃
    INPUT STRAIN GAUGE :
      quarter, half or full bridge (50~1000Ω)
      Built-in 120Ω and 350Ω dummy resister
    TRANSDUCER :
      Piezoresistive strain gauge types,potentiometer,DCDT transducers displacement.
    AMPLIFIER 1st Gain : ×1, ×10, ×100, ×400, ×1000 5steps (accuracy ±1%)
    2nd Gain : ×1~×11 continuously variable
    Vernier multiplier : 10-turn counting knob with direct readout (×1~×11)
    Fine Adjust
    Frequence response : 100kHz (-3dB), max
    Input resistance : 1GΩ, differential or common mode
    Input capacitance : 4pF, differential or common mode
    Input voltage range :
      ± 10V, differential mode
      12V-(G/2× Vd), common mode (Vd = actual differential input voltage)
    Bias current : ± 30nA, typical, each input
    Common-mode rejection (G=100) : 100dB, min, dc to 60Hz with 1kΩ source imbalance
    Stability (G<1000) : 5ppm/℃, max
    Noise (G=100) : 0.01~10Hz, 0.3μVp-p R.T.I
    FILTER Characteristic : low-pass active 2-pole Butterworth standard
    Frequencies (-3dB) : 10Hz, 100Hz, 1kHz, 10kHz, wide-band
    AMPLIFIER OUTPUT
    (BNC CONNECTOR)
    Output 1 : ±10V @100mA max
    Output 2 ; ±10V @10mA max
    Linearity : ±0.01%
    VOLTAGE DISPLAY Display character : 7-segment 4-digits LED
    Display range : 0.000V ~ ± 10.00V
    GAIN 5 steps Amplilfier (x1, x10, x100, x400, x1000)
    FREQUENCY RESPONSE 100kHz (-3dB), Max
    BRIDGE BALANCE Auto ranging : ± 4000με (2mV/V)
    Auto balance time : 1 second, typical
    Manual balance range : ± 1V
    Storage : non-volatile data memory (EEPROM)
    LOW PASS FILTER
     
    4 steps 10Hz, 100Hz, 1kHz, 10kHz (-3dB)
    LINEARITY ±0.01%
    STABILITY ±0.01%℃
    SHUNT CALIBRATION Bridge resistance 120Ω : 200με and 2000με calibrations
    Bridge resistance 350Ω : 200με and 2000με calibrations
    INPUT IMPEDANCE
     
    more than 1GΩ
    POWER AC 110V or 220V (switch selected), 50/60Hz, 7.5watts
    3-wirecode ( 2-wire : power / 1-wire : Ground)

     
    • DIMENSIONS
    • SPECIFICATIONS
    Specifications Accuracy
    EXCITATION 5 steps : 1V, 2V, 5V, 7.5V, 10V
    Current : 170mA, max.
    Remote sence error : 0.0005%/Ω at lead resistance (350Ω load)
    Noise and ripple : 0.05% p-p, max (dc 10kHz)
    Stability : ± 0.02%/℃
    INPUT STRAIN GAUGE :
      quarter, half or full bridge (50~1000Ω)
      Built-in 120Ω and 350Ω dummy resister
    TRANSDUCER :
      Piezoresistive strain gauge types,potentiometer,DCDT transducers displacement.
    AMPLIFIER 1st Gain : ×1, ×10, ×100, ×400, ×1000 5steps (accuracy ±1%)
    2nd Gain : ×1~×11 continuously variable
    Vernier multiplier : 10-turn counting knob with direct readout (×1~×11)
    Fine Adjust
    Frequence response : 100kHz (-3dB), max
    Input resistance : 1GΩ, differential or common mode
    Input capacitance : 4pF, differential or common mode
    Input voltage range :
      ± 10V, differential mode
      12V-(G/2× Vd), common mode (Vd = actual differential input voltage)
    Bias current : ± 30nA, typical, each input
    Common-mode rejection (G=100) : 100dB, min, dc to 60Hz with 1kΩ source imbalance
    Stability (G<1000) : 5ppm/℃, max
    Noise (G=100) : 0.01~10Hz, 0.3μVp-p R.T.I
    FILTER Characteristic : low-pass active 2-pole Butterworth standard
    Frequencies (-3dB) : 10Hz, 100Hz, 1kHz, 10kHz, wide-band
    AMPLIFIER OUTPUT
    (BNC CONNECTOR)
    Output 1 : ±10V @100mA max
    Output 2 ; ±10V @10mA max
    Linearity : ±0.01%
    VOLTAGE DISPLAY Display character : 7-segment 4-digits LED
    Display range : 0.000V ~ ± 10.00V
    GAIN 5 steps Amplilfier (x1, x10, x100, x400, x1000)
    FREQUENCY RESPONSE 100kHz (-3dB), Max
    BRIDGE BALANCE Auto ranging : ± 4000με (2mV/V)
    Auto balance time : 1 second, typical
    Manual balance range : ± 1V
    Storage : non-volatile data memory (EEPROM)
    LOW PASS FILTER
     
    4 steps 10Hz, 100Hz, 1kHz, 10kHz (-3dB)
    LINEARITY ±0.01%
    STABILITY ±0.01%℃
    SHUNT CALIBRATION Bridge resistance 120Ω : 200με and 2000με calibrations
    Bridge resistance 350Ω : 200με and 2000με calibrations
    INPUT IMPEDANCE
     
    more than 1GΩ
    POWER AC 110V or 220V (switch selected), 50/60Hz, 7.5watts
    3-wirecode ( 2-wire : power / 1-wire : Ground)

     
    • DIMENSIONS



    韓國DacelI儀表|放大器DN-AM1000

    深圳市世泰瑞爾工業儀器儀表有限公司    www.handmadebybrynne.com
    產品留言
    標題
    聯系人
    聯系電話
    內容
    驗證碼
    點擊換一張
    注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
    2.如有必要,請您留下您的詳細聯系方式!

    粵公網安備 44030602001747號

    色丁香
    <kbd id="80as6"></kbd>
  • <bdo id="80as6"></bdo>
  • <blockquote id="80as6"></blockquote>
  • <code id="80as6"><s id="80as6"></s></code>